/*
 *  Copyright 2008-2019 NVIDIA Corporation
 *  Copyright 2013 Filipe RNC Maia
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */

/*! \file complex.h
 *  \brief Complex numbers
 */

#pragma once

#include <thrust/detail/config.h>

#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
#  pragma GCC system_header
#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
#  pragma clang system_header
#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
#  pragma system_header
#endif // no system header

#include <thrust/detail/type_traits.h>
#include <thrust/type_traits/is_trivially_relocatable.h>

#include <cmath>
#include <complex>
#include <sstream>

#define THRUST_STD_COMPLEX_REAL(z) \
  reinterpret_cast<const typename ::cuda::std::__libcpp_remove_reference_t<decltype(z)>::value_type(&)[2]>(z)[0]
#define THRUST_STD_COMPLEX_IMAG(z) \
  reinterpret_cast<const typename ::cuda::std::__libcpp_remove_reference_t<decltype(z)>::value_type(&)[2]>(z)[1]
#define THRUST_STD_COMPLEX_DEVICE _CCCL_DEVICE

THRUST_NAMESPACE_BEGIN

/*
 *  Calls to the standard math library from inside the thrust namespace
 *  with real arguments require explicit scope otherwise they will fail
 *  to resolve as it will find the equivalent complex function but then
 *  fail to match the template, and give up looking for other scopes.
 */

/*! \addtogroup numerics
 *  \{
 */

/*! \addtogroup complex_numbers Complex Numbers
 *  \{
 */

/*! \p complex is the Thrust equivalent to <tt>std::complex</tt>. It is
 *  functionally identical to it, but can also be used in device code which
 *  <tt>std::complex</tt> currently cannot.
 *
 *  \tparam T The type used to hold the real and imaginary parts. Should be
 *  <tt>float</tt> or <tt>double</tt>. Others types are not supported.
 *
 */
template <typename T>
struct complex
{
public:
  /*! \p value_type is the type of \p complex's real and imaginary parts.
   */
  using value_type = T;

  /* --- Constructors --- */

  /*! Construct a complex number with an imaginary part of 0.
   *
   *  \param re The real part of the number.
   */
  _CCCL_HOST_DEVICE complex(const T& re);

  /*! Construct a complex number from its real and imaginary parts.
   *
   *  \param re The real part of the number.
   *  \param im The imaginary part of the number.
   */
  _CCCL_HOST_DEVICE complex(const T& re, const T& im);

  /*! Default construct a complex number.
   */
  complex() = default;

  /*! This copy constructor copies from a \p complex with a type that is
   *  convertible to this \p complex's \c value_type.
   *
   *  \param z The \p complex to copy from.
   */
  complex(const complex<T>& z) = default;

  /*! This converting copy constructor copies from a \p complex with a type
   *  that is convertible to this \p complex's \c value_type.
   *
   *  \param z The \p complex to copy from.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex(const complex<U>& z);

  /*! This converting copy constructor copies from a <tt>std::complex</tt> with
   *  a type that is convertible to this \p complex's \c value_type.
   *
   *  \param z The \p complex to copy from.
   */
  _CCCL_HOST THRUST_STD_COMPLEX_DEVICE complex(const std::complex<T>& z);

  /*! This converting copy constructor copies from a <tt>std::complex</tt> with
   *  a type that is convertible to this \p complex's \c value_type.
   *
   *  \param z The \p complex to copy from.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST THRUST_STD_COMPLEX_DEVICE complex(const std::complex<U>& z);

  /* --- Assignment Operators --- */

  /*! Assign `re` to the real part of this \p complex and set the imaginary part
   *  to 0.
   *
   *  \param re The real part of the number.
   */
  _CCCL_HOST_DEVICE complex& operator=(const T& re);

  /*! Assign `z.real()` and `z.imag()` to the real and imaginary parts of this
   *  \p complex respectively.
   *
   *  \param z The \p complex to copy from.
   */
  complex& operator=(const complex<T>& z) = default;

  /*! Assign `z.real()` and `z.imag()` to the real and imaginary parts of this
   *  \p complex respectively.
   *
   *  \param z The \p complex to copy from.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex& operator=(const complex<U>& z);

  /*! Assign `z.real()` and `z.imag()` to the real and imaginary parts of this
   *  \p complex respectively.
   *
   *  \param z The \p complex to copy from.
   */
  _CCCL_HOST THRUST_STD_COMPLEX_DEVICE complex& operator=(const std::complex<T>& z);

  /*! Assign `z.real()` and `z.imag()` to the real and imaginary parts of this
   *  \p complex respectively.
   *
   *  \param z The \p complex to copy from.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST THRUST_STD_COMPLEX_DEVICE complex& operator=(const std::complex<U>& z);

  /* --- Compound Assignment Operators --- */

  /*! Adds a \p complex to this \p complex and assigns the result to this
   *  \p complex.
   *
   *  \param z The \p complex to be added.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator+=(const complex<U>& z);

  /*! Subtracts a \p complex from this \p complex and assigns the result to
   *  this \p complex.
   *
   *  \param z The \p complex to be subtracted.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator-=(const complex<U>& z);

  /*! Multiplies this \p complex by another \p complex and assigns the result
   *  to this \p complex.
   *
   *  \param z The \p complex to be multiplied.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator*=(const complex<U>& z);

  /*! Divides this \p complex by another \p complex and assigns the result to
   *  this \p complex.
   *
   *  \param z The \p complex to be divided.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator/=(const complex<U>& z);

  /*! Adds a scalar to this \p complex and assigns the result to this
   *  \p complex.
   *
   *  \param z The \p complex to be added.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator+=(const U& z);

  /*! Subtracts a scalar from this \p complex and assigns the result to
   *  this \p complex.
   *
   *  \param z The scalar to be subtracted.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator-=(const U& z);

  /*! Multiplies this \p complex by a scalar and assigns the result
   *  to this \p complex.
   *
   *  \param z The scalar to be multiplied.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator*=(const U& z);

  /*! Divides this \p complex by a scalar and assigns the result to
   *  this \p complex.
   *
   *  \param z The scalar to be divided.
   *
   *  \tparam U is convertible to \c value_type.
   */
  template <typename U>
  _CCCL_HOST_DEVICE complex<T>& operator/=(const U& z);

  /* --- Getter functions ---
   * The volatile ones are there to help for example
   * with certain reductions optimizations
   */

  /*! Returns the real part of this \p complex.
   */
  _CCCL_HOST_DEVICE T real() const volatile
  {
    return data.x;
  }

  /*! Returns the imaginary part of this \p complex.
   */
  _CCCL_HOST_DEVICE T imag() const volatile
  {
    return data.y;
  }

  /*! Returns the real part of this \p complex.
   */
  _CCCL_HOST_DEVICE T real() const
  {
    return data.x;
  }

  /*! Returns the imaginary part of this \p complex.
   */
  _CCCL_HOST_DEVICE T imag() const
  {
    return data.y;
  }

  /* --- Setter functions ---
   * The volatile ones are there to help for example
   * with certain reductions optimizations
   */

  /*! Sets the real part of this \p complex.
   *
   *  \param re The new real part of this \p complex.
   */
  _CCCL_HOST_DEVICE void real(T re) volatile
  {
    data.x = re;
  }

  /*! Sets the imaginary part of this \p complex.
   *
   *  \param im The new imaginary part of this \p complex.e
   */
  _CCCL_HOST_DEVICE void imag(T im) volatile
  {
    data.y = im;
  }

  /*! Sets the real part of this \p complex.
   *
   *  \param re The new real part of this \p complex.
   */
  _CCCL_HOST_DEVICE void real(T re)
  {
    data.x = re;
  }

  /*! Sets the imaginary part of this \p complex.
   *
   *  \param im The new imaginary part of this \p complex.
   */
  _CCCL_HOST_DEVICE void imag(T im)
  {
    data.y = im;
  }

  /* --- Casting functions --- */

  /*! Casts this \p complex to a <tt>std::complex</tt> of the same type.
   */
  _CCCL_HOST operator std::complex<T>() const
  {
    return std::complex<T>(real(), imag());
  }

private:
#if defined(_CCCL_CUDA_COMPILER_NVCC) && _CCCL_CUDACC_VER < 1107000
  struct __align__(sizeof(T) * 2) storage
#elif defined(_CCCL_COMPILER_ICC)
  struct storage
#else // !(defined(_CCCL_COMPILER_ICC) || (defined(_CCCL_CUDA_COMPILER_NVCC) && _CCCL_CUDACC_VER < 1107000))
  struct alignas(sizeof(T) * 2) storage
#endif // !(defined(_CCCL_COMPILER_ICC) || (defined(_CCCL_CUDA_COMPILER_NVCC) && _CCCL_CUDACC_VER < 1107000))
  {
    T x;
    T y;
  }
#ifdef _CCCL_COMPILER_ICC
  __attribute__((aligned(sizeof(T) * 2)))
#endif // _CCCL_COMPILER_ICC
  ;
  storage data;
};

/* --- General Functions --- */

/*! Returns the magnitude (also known as absolute value) of a \p complex.
 *
 *  \param z The \p complex from which to calculate the absolute value.
 */
template <typename T>
_CCCL_HOST_DEVICE T abs(const complex<T>& z);

/*! Returns the phase angle (also known as argument) in radians of a \p complex.
 *
 *  \param z The \p complex from which to calculate the phase angle.
 */
template <typename T>
_CCCL_HOST_DEVICE T arg(const complex<T>& z);

/*! Returns the square of the magnitude of a \p complex.
 *
 *  \param z The \p complex from which to calculate the norm.
 */
template <typename T>
_CCCL_HOST_DEVICE T norm(const complex<T>& z);

/*! Returns the complex conjugate of a \p complex.
 *
 *  \param z The \p complex from which to calculate the complex conjugate.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> conj(const complex<T>& z);

/*! Returns a \p complex with the specified magnitude and phase.
 *
 *  \param m The magnitude of the returned \p complex.
 *  \param theta The phase of the returned \p complex in radians.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> polar(const T0& m, const T1& theta = T1());

/*! Returns the projection of a \p complex on the Riemann sphere.
 *  For all finite \p complex it returns the argument. For \p complexs
 *  with a non finite part returns (INFINITY,+/-0) where the sign of
 *  the zero matches the sign of the imaginary part of the argument.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> proj(const T& z);

/* --- Binary Arithmetic operators --- */

/*! Adds two \p complex numbers.
 *
 *  The value types of the two \p complex types should be compatible and the
 *  type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator+(const complex<T0>& x, const complex<T1>& y);

/*! Adds a scalar to a \p complex number.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The \p complex.
 *  \param y The scalar.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator+(const complex<T0>& x, const T1& y);

/*! Adds a \p complex number to a scalar.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The scalar.
 *  \param y The \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator+(const T0& x, const complex<T1>& y);

/*! Subtracts two \p complex numbers.
 *
 *  The value types of the two \p complex types should be compatible and the
 *  type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The first \p complex (minuend).
 *  \param y The second \p complex (subtrahend).
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator-(const complex<T0>& x, const complex<T1>& y);

/*! Subtracts a scalar from a \p complex number.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The \p complex (minuend).
 *  \param y The scalar (subtrahend).
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator-(const complex<T0>& x, const T1& y);

/*! Subtracts a \p complex number from a scalar.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The scalar (minuend).
 *  \param y The \p complex (subtrahend).
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator-(const T0& x, const complex<T1>& y);

/*! Multiplies two \p complex numbers.
 *
 *  The value types of the two \p complex types should be compatible and the
 *  type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator*(const complex<T0>& x, const complex<T1>& y);

/*! Multiplies a \p complex number by a scalar.
 *
 *  \param x The \p complex.
 *  \param y The scalar.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator*(const complex<T0>& x, const T1& y);

/*! Multiplies a scalar by a \p complex number.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The scalar.
 *  \param y The \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator*(const T0& x, const complex<T1>& y);

/*! Divides two \p complex numbers.
 *
 *  The value types of the two \p complex types should be compatible and the
 *  type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The numerator (dividend).
 *  \param y The denomimator (divisor).
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator/(const complex<T0>& x, const complex<T1>& y);

/*! Divides a \p complex number by a scalar.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The complex numerator (dividend).
 *  \param y The scalar denomimator (divisor).
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator/(const complex<T0>& x, const T1& y);

/*! Divides a scalar by a \p complex number.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The scalar numerator (dividend).
 *  \param y The complex denomimator (divisor).
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> operator/(const T0& x, const complex<T1>& y);

/* --- Unary Arithmetic operators --- */

/*! Unary plus, returns its \p complex argument.
 *
 *  \param y The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> operator+(const complex<T>& y);

/*! Unary minus, returns the additive inverse (negation) of its \p complex
 * argument.
 *
 *  \param y The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> operator-(const complex<T>& y);

/* --- Exponential Functions --- */

/*! Returns the complex exponential of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> exp(const complex<T>& z);

/*! Returns the complex natural logarithm of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> log(const complex<T>& z);

/*! Returns the complex base 10 logarithm of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> log10(const complex<T>& z);

/* --- Power Functions --- */

/*! Returns a \p complex number raised to another.
 *
 *  The value types of the two \p complex types should be compatible and the
 *  type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The base.
 *  \param y The exponent.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> pow(const complex<T0>& x, const complex<T1>& y);

/*! Returns a \p complex number raised to a scalar.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The base.
 *  \param y The exponent.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> pow(const complex<T0>& x, const T1& y);

/*! Returns a scalar raised to a \p complex number.
 *
 *  The value type of the \p complex should be compatible with the scalar and
 *  the type of the returned \p complex is the promoted type of the two arguments.
 *
 *  \param x The base.
 *  \param y The exponent.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE complex<::cuda::std::__common_type_t<T0, T1>> pow(const T0& x, const complex<T1>& y);

/*! Returns the complex square root of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> sqrt(const complex<T>& z);

/* --- Trigonometric Functions --- */

/*! Returns the complex cosine of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> cos(const complex<T>& z);

/*! Returns the complex sine of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> sin(const complex<T>& z);

/*! Returns the complex tangent of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> tan(const complex<T>& z);

/* --- Hyperbolic Functions --- */

/*! Returns the complex hyperbolic cosine of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> cosh(const complex<T>& z);

/*! Returns the complex hyperbolic sine of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> sinh(const complex<T>& z);

/*! Returns the complex hyperbolic tangent of a \p complex number.
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> tanh(const complex<T>& z);

/* --- Inverse Trigonometric Functions --- */

/*! Returns the complex arc cosine of a \p complex number.
 *
 *  The range of the real part of the result is [0, Pi] and
 *  the range of the imaginary part is [-inf, +inf]
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> acos(const complex<T>& z);

/*! Returns the complex arc sine of a \p complex number.
 *
 *  The range of the real part of the result is [-Pi/2, Pi/2] and
 *  the range of the imaginary part is [-inf, +inf]
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> asin(const complex<T>& z);

/*! Returns the complex arc tangent of a \p complex number.
 *
 *  The range of the real part of the result is [-Pi/2, Pi/2] and
 *  the range of the imaginary part is [-inf, +inf]
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> atan(const complex<T>& z);

/* --- Inverse Hyperbolic Functions --- */

/*! Returns the complex inverse hyperbolic cosine of a \p complex number.
 *
 *  The range of the real part of the result is [0, +inf] and
 *  the range of the imaginary part is [-Pi, Pi]
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> acosh(const complex<T>& z);

/*! Returns the complex inverse hyperbolic sine of a \p complex number.
 *
 *  The range of the real part of the result is [-inf, +inf] and
 *  the range of the imaginary part is [-Pi/2, Pi/2]
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> asinh(const complex<T>& z);

/*! Returns the complex inverse hyperbolic tangent of a \p complex number.
 *
 *  The range of the real part of the result is [-inf, +inf] and
 *  the range of the imaginary part is [-Pi/2, Pi/2]
 *
 *  \param z The \p complex argument.
 */
template <typename T>
_CCCL_HOST_DEVICE complex<T> atanh(const complex<T>& z);

/* --- Stream Operators --- */

/*! Writes to an output stream a \p complex number in the form (real, imaginary).
 *
 *  \param os The output stream.
 *  \param z The \p complex number to output.
 */
template <typename T, typename CharT, typename Traits>
std::basic_ostream<CharT, Traits>& operator<<(std::basic_ostream<CharT, Traits>& os, const complex<T>& z);

/*! Reads a \p complex number from an input stream.
 *
 *  The recognized formats are:
 * - real
 * - (real)
 * - (real, imaginary)
 *
 * The values read must be convertible to the \p complex's \c value_type
 *
 *  \param is The input stream.
 *  \param z The \p complex number to set.
 */
template <typename T, typename CharT, typename Traits>
_CCCL_HOST std::basic_istream<CharT, Traits>& operator>>(std::basic_istream<CharT, Traits>& is, complex<T>& z);

/* --- Equality Operators --- */

/*! Returns true if two \p complex numbers are equal and false otherwise.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE bool operator==(const complex<T0>& x, const complex<T1>& y);

/*! Returns true if two \p complex numbers are equal and false otherwise.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST THRUST_STD_COMPLEX_DEVICE bool operator==(const complex<T0>& x, const std::complex<T1>& y);

/*! Returns true if two \p complex numbers are equal and false otherwise.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST THRUST_STD_COMPLEX_DEVICE bool operator==(const std::complex<T0>& x, const complex<T1>& y);

/*! Returns true if the imaginary part of the \p complex number is zero and
 *  the real part is equal to the scalar. Returns false otherwise.
 *
 *  \param x The scalar.
 *  \param y The \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE bool operator==(const T0& x, const complex<T1>& y);

/*! Returns true if the imaginary part of the \p complex number is zero and
 *  the real part is equal to the scalar. Returns false otherwise.
 *
 *  \param x The \p complex.
 *  \param y The scalar.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE bool operator==(const complex<T0>& x, const T1& y);

/*! Returns true if two \p complex numbers are different and false otherwise.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE bool operator!=(const complex<T0>& x, const complex<T1>& y);

/*! Returns true if two \p complex numbers are different and false otherwise.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST THRUST_STD_COMPLEX_DEVICE bool operator!=(const complex<T0>& x, const std::complex<T1>& y);

/*! Returns true if two \p complex numbers are different and false otherwise.
 *
 *  \param x The first \p complex.
 *  \param y The second \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST THRUST_STD_COMPLEX_DEVICE bool operator!=(const std::complex<T0>& x, const complex<T1>& y);

/*! Returns true if the imaginary part of the \p complex number is not zero or
 *  the real part is different from the scalar. Returns false otherwise.
 *
 *  \param x The scalar.
 *  \param y The \p complex.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE bool operator!=(const T0& x, const complex<T1>& y);

/*! Returns true if the imaginary part of the \p complex number is not zero or
 *  the real part is different from the scalar. Returns false otherwise.
 *
 *  \param x The \p complex.
 *  \param y The scalar.
 */
template <typename T0, typename T1>
_CCCL_HOST_DEVICE bool operator!=(const complex<T0>& x, const T1& y);

THRUST_NAMESPACE_END

#include <thrust/detail/complex/complex.inl>

#undef THRUST_STD_COMPLEX_REAL
#undef THRUST_STD_COMPLEX_IMAG
#undef THRUST_STD_COMPLEX_DEVICE

/*! \} // complex_numbers
 */

/*! \} // numerics
 */